アプリクローナー
Vape Builder Mod Apk v1.7.2 (無料で支払った)
アプリ名:
Vape Builder
1.7.2
アンドロイド用
更新日
Wed Sep 07 20:55:39 CST 2022
6.0
MOD情報 :
EN
無料で支払った
PlayMods スペースの機能
PlayMods はユーザー向けのゲーム補助ツールの開発に取り組んでいます
ダウンロード
Vape Builder 無料で支払ったの説明
Full User Guide, Support Contact and Feature Requests can be found at http://iethis.com
Vape Builder assists in building coils for use in rebuildable atomizers. It lets you specify a target resistance for the coil, the type of wire and the diameter of the coil to be built, it will then show you the number of wraps required to match as closely as possible the target resistance.
The tool provides a single page interface to achieve this and minimizes the need for keyboard input making finding the desired information, quick and intuitive.
• Shows number of wraps required to meet the target resistance
• Slide volts from 3.0 to 10.0
• Real-time display of amps and watts with the build
• Warnings levels at 80% and 100% of battery rating
• Save and load complete build configurations
• 207 types of wire already included
• 92 batteries included for selection
• Customize and add wire types, coil diameters and batteries
• Lookup table showing amps and watts at volts ranging from 3.0-10.6V and resistance ranging from 0.01-3.99 Ohms
• Set units to either Imperial or Metric
The current amp draw and wattage of the coil is displayed at all times, backed up with clear battery warning graphics to ensure you see at a glance any potential battery drain issues.
A slider is provided to adjust the voltage provided to the coil which updates in real time the amp and watt display and power warning indications.
The Quick Lookup table provides a quick view of all the amp and watt levels for resistances from 0.1 Ohms to 3.9 Ohms at the currently set voltage. At the press of a button you can switch this to view all of the amp and watt levels for voltages from 3.0 Volts to 10.6 Volts for the current target resistance.
Rapidly save your builds and load any of them back at a later time, so you can get your perfect build for each atomizer and quickly recall it when you need to re-build. All of the selections you have made are saved along with the build, including which battery you were using.
A number of standard wire types are already included, both in imperial and metric, and you can edit these or add to them if you would like to use a wire material or size not already included.
As well as being able to select from the list of batteries included you can add you own to ensure that power warnings are accurate for the batteries you are using.
Vape Builder assists in building coils for use in rebuildable atomizers. It lets you specify a target resistance for the coil, the type of wire and the diameter of the coil to be built, it will then show you the number of wraps required to match as closely as possible the target resistance.
The tool provides a single page interface to achieve this and minimizes the need for keyboard input making finding the desired information, quick and intuitive.
• Shows number of wraps required to meet the target resistance
• Slide volts from 3.0 to 10.0
• Real-time display of amps and watts with the build
• Warnings levels at 80% and 100% of battery rating
• Save and load complete build configurations
• 207 types of wire already included
• 92 batteries included for selection
• Customize and add wire types, coil diameters and batteries
• Lookup table showing amps and watts at volts ranging from 3.0-10.6V and resistance ranging from 0.01-3.99 Ohms
• Set units to either Imperial or Metric
The current amp draw and wattage of the coil is displayed at all times, backed up with clear battery warning graphics to ensure you see at a glance any potential battery drain issues.
A slider is provided to adjust the voltage provided to the coil which updates in real time the amp and watt display and power warning indications.
The Quick Lookup table provides a quick view of all the amp and watt levels for resistances from 0.1 Ohms to 3.9 Ohms at the currently set voltage. At the press of a button you can switch this to view all of the amp and watt levels for voltages from 3.0 Volts to 10.6 Volts for the current target resistance.
Rapidly save your builds and load any of them back at a later time, so you can get your perfect build for each atomizer and quickly recall it when you need to re-build. All of the selections you have made are saved along with the build, including which battery you were using.
A number of standard wire types are already included, both in imperial and metric, and you can edit these or add to them if you would like to use a wire material or size not already included.
As well as being able to select from the list of batteries included you can add you own to ensure that power warnings are accurate for the batteries you are using.
このゲームが気に入ったら、以下の同様のゲームをプレイしてみてください。
——ユーザーがアップロード
追加情報
カテゴリー: 生産性 出版社: Network 要件: Andriod 5.0+ 発行日: Wed Sep 07 20:55:39 CST 2022
に似ている Vape Builder 無料で支払った
Microsoft Outlook
v4.2220.1
84.5MB
ES File Explorer/Manager PRO
vPro 1.1.4.1
7.0MB
Windows にリンク
v1.22052.239.0
85.6MB
Google ドキュメント
v1.23.102.02.90
93.7MB
PVS Software
v4.6.18
49.6MB
ウィークリープランナー
v5.8.3
58.4MB
PS2 Emulator Iso Games Pro
v1.0
3.7MB
RD - Skins Tool ML Complete
v19.09.2022
16.4MB
Galaxy Notes
v4.4.10.71
91.2MB
おすすめされた
Tizi Home Design & Room Decor
v1.1.4
179.6MB
ピザショップ: ピザゲーム
v1.0.4
97.8MB
Gaming Cafe Life
v1.1.5
180.6MB
Hamster Inn
v1.1.0
145.3MB
Geng Motor Multiplayer
v1.3
135.4MB
My Avatar World Games for KIds
v1.82
474.1MB
Supermarket Simulator 3D Store
v1.0.33
104.1MB
Roblox
v2.622.471
138.0MB
Scary Teacher 3D
v7.3
1.0GB
レビュー (0)
レビューを書く
内容なし〜