แอพ โคลนเนอร์
Ampere Mod Apk vv4.01 (Pro features unlocked)
ชื่อแอปพลิเคชัน:
Ampere
v4.01
แอนดรอยด์ Android
อัพเดทเมื่อ
Fri May 05 15:00:43 CST 2023
6.0
ถอด MOD :
EN
ปลดล็อคฟีเจอร์ระดับโปร
คุณสมบัติ PlayMods Space
PlayMods มุ่งมั่นที่จะพัฒนาเครื่องมือเสริมการเล่นเกมสำหรับผู้ใช้
ดาวน์โหลด
คำอธิบายของ Ampere Pro features unlocked
Did you ever felt, that one Charger/USB cable set charges your device really fast and the other not? Now, you can prove this with Ampere.
Measure the charging and discharging current of your battery.
PRO features:
- Widgets
- Notification
- Alerts on device
- Alerts on Android Wear
Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.
The app is not meant to be mA accurate. It is only good for evaluate which Charger/USB cable combo is working the best for you on the same device.
----
Please read also the FAQ: http://goo.gl/R8XgXX
----
Start the app and wait ca. 10 seconds ("measuring" is on the display). After this time, the charging or discharging current will be shown.
The current depends on many things:
- Charger (USB/AC/Wireless)
- USB cable
- Phone type
- Current tasks running
- Display brightness
- WiFi state
- GPS state
Please don't use the readings on this app as concrete science. However, the readings are good enough to relatively measure how various chargers and USB cables fair on the same device.
If the app shows 0mA all the time, please use the settings option "Old measurement method". You can force the app with it to use the old measurement interface, if the Lollipop device has at least one.
Unfortunately some Samsung devices don't give correct (measured) values (e.g.: S5), just the maximum possible charging current with the actual USB cable/charger configuration. This is a firmware problem.
----
Background info: The app measures the charging/discharging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.
If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).
----
Technical info: The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.
----
LiPo batteries don't draw the maximum for the full time it takes to charge the phone. If your battery is charged almost full then the charging current will be much less as by lower battery levels.
- A graph explaining LiPo charge stages: http://batteryuniversity.com/_img/content/ion1.jpg
- Dave's (EEVBlog) LiPo Charging Tutorial: http://youtu.be/A6mKd5_-abk
----
Phones/ROMS compatible only with "Old measurement method" switched on and selected the right "Measurement interface":
➤ HTC One M7 / M8
➤ LG G3
Phones/ROMS reported to be not working with this app:
➤ Galaxy Grand Prime - fortuna3gdtv
➤ Galaxy Note2 - t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 - d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 - degas3g
➤ HTC Desire 510 - htc_a11ul8x26
➤ HTC One S (ville), X (endeavoru), XL (evita)
➤ HTC Sensation 4G - pyramid
Please do not give wrong rating, if your phone is one of the above. Not the app is wrong, but your phone does not support this kind of measurement yet.
If the app doesn't work on your device with pre-Lollipop Android version, then please read the first and the second posts in this XDA developer forum thread: http://goo.gl/pZqJg8 . Please post your problem with screenshots in the XDA thread.
Please read also the FAQ: http://goo.gl/R8XgXX
Measure the charging and discharging current of your battery.
PRO features:
- Widgets
- Notification
- Alerts on device
- Alerts on Android Wear
Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.
The app is not meant to be mA accurate. It is only good for evaluate which Charger/USB cable combo is working the best for you on the same device.
----
Please read also the FAQ: http://goo.gl/R8XgXX
----
Start the app and wait ca. 10 seconds ("measuring" is on the display). After this time, the charging or discharging current will be shown.
The current depends on many things:
- Charger (USB/AC/Wireless)
- USB cable
- Phone type
- Current tasks running
- Display brightness
- WiFi state
- GPS state
Please don't use the readings on this app as concrete science. However, the readings are good enough to relatively measure how various chargers and USB cables fair on the same device.
If the app shows 0mA all the time, please use the settings option "Old measurement method". You can force the app with it to use the old measurement interface, if the Lollipop device has at least one.
Unfortunately some Samsung devices don't give correct (measured) values (e.g.: S5), just the maximum possible charging current with the actual USB cable/charger configuration. This is a firmware problem.
----
Background info: The app measures the charging/discharging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.
If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).
----
Technical info: The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.
----
LiPo batteries don't draw the maximum for the full time it takes to charge the phone. If your battery is charged almost full then the charging current will be much less as by lower battery levels.
- A graph explaining LiPo charge stages: http://batteryuniversity.com/_img/content/ion1.jpg
- Dave's (EEVBlog) LiPo Charging Tutorial: http://youtu.be/A6mKd5_-abk
----
Phones/ROMS compatible only with "Old measurement method" switched on and selected the right "Measurement interface":
➤ HTC One M7 / M8
➤ LG G3
Phones/ROMS reported to be not working with this app:
➤ Galaxy Grand Prime - fortuna3gdtv
➤ Galaxy Note2 - t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 - d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 - degas3g
➤ HTC Desire 510 - htc_a11ul8x26
➤ HTC One S (ville), X (endeavoru), XL (evita)
➤ HTC Sensation 4G - pyramid
Please do not give wrong rating, if your phone is one of the above. Not the app is wrong, but your phone does not support this kind of measurement yet.
If the app doesn't work on your device with pre-Lollipop Android version, then please read the first and the second posts in this XDA developer forum thread: http://goo.gl/pZqJg8 . Please post your problem with screenshots in the XDA thread.
Please read also the FAQ: http://goo.gl/R8XgXX
หากคุณชอบเกมนี้ คุณสามารถลองเล่นเกมที่คล้ายกันด้านล่าง:
——อัปโหลดโดยผู้ใช้
ข้อมูลเพิ่มเติม
หมวดหมู่: เครื่องมือ สำนักพิมพ์: Braintrapp ความต้องการ: Andriod 5.0+ วันที่เผยแพร่: Fri May 05 15:00:43 CST 2023
Ampere Pro features unlocked v4.01 อัปเดต
อัพเดทเมื่อ Fri May 05 15:00:43 CST 2023แก้ไขข้อผิดพลาด
แท็ก
คล้ายกับ Ampere Pro features unlocked
VPN Proxy Master - แอพ VPN
v2.2.8.1
20.6MB
SnapTube VIP
v7.18.0.71850310
25.9MB
TXD Tool
v1.4.9.3
4.9MB
Realistic Shader Mod Minecraft
v223
37.5MB
GameKeyboard +
v6.1.1
308.3KB
Minecraft Master Mods
v1.1.1
18.2MB
Widgetable: Social Widgets
v1.6.100
95.0MB
EVA AI Chat Bot & Soulmate
v3.57.0
39.4MB
Chat AI: AI Chat Bot Assistant
v1.8.3
32.4MB
แนะนำ
Toca Life World(ปลดล็อกของขวัญทั้งหมด)
v1.87
579.3MB
Supermarket Simulator 3D Store
v1.0.38
115.6MB
Moto Wheelie 3D
v0.22
58.3MB
That's not my neighbor
v1.0.4
269.3MB
PK XD - สำรวจจักรวาล!
v1.47.5
516.9MB
Avatar World: City Life
v1.82
474.1MB
Grand Theft Auto: San Andreas
v2.00
1.8GB
Subway Surfers
v3.28.1
170.4MB
Human: Fall Flat
v1.14
1.7GB
บทความแนะนำ
บทวิจารณ์ (0)
เขียนรีวิว
ไม่มีเนื้อหา~
PlayMods
PlayMods เล่นสนุกยิ่งขึ้น!
ดาวน์โหลด
v2.6.8
(31.5MB)
หมวดหมู่
มากกว่า>
ศิลปะและการออกแบบ
อีมูเลเตอร์
รถยนต์และยานพาหนะ
ความงาม
หนังสือและข้อมูลอ้างอิง
ธุรกิจ
การ์ตูน
การสื่อสาร
การศึกษา
บันเทิง
กิจกรรม
อาหารและเครื่องดื่ม
สุขภาพและการออกกำลังกาย แอป
บ้านและการตกแต่ง
ไลบรารีและการสาธิต
ไลฟ์สไตล์
แผนที่และการนำทาง
การแพทย์
เพลงและเสียง
ข่าวสารและนิตยสาร
การเลี้ยงลูก
การกำหนดค่าส่วนบุคคล
การถ่ายภาพ
ประสิทธิภาพการทำงาน
ช็อปปิ้ง
สังคม
กีฬา
เครื่องมือ
การเดินทางและท้องถิ่น
การเล่นและตัดต่อวิดีโอ
พยากรณ์อากาศ